You did WHAT? 1981 FLTRX aka FrankenGlide – GeezerGlide LLC

Free Shipping on all orders over $49

You did WHAT? 1981 FLTRX aka FrankenGlide

In a ‘somewhat crazy’ project I did in 2011-2012 I repaired a 1981 touring frame that had a good front section but bent rear struts. A 2010 touring frame without a neck donated to me by my local dealership was chosen to fix that. After measuring and setting things up in a jig I realized that the overall geometry hadn’t changed, and the parts were going to fit together!

I decided to go all the way and make it a 1981 bike with EFI, throttle by wire and ABS.

The frames were cut to size, mounted in a jig and Jimmy, my business partner at the time, welded the two portions together. Grinding the welds down to blend everything together worked fairly well.

GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion

It was necessary to update the fork lock tab so the pile of 2010 parts I had could be installed:

GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion

After media blasting and some additional cleaning the frame got a fresh powder coat. Motor and the whole drivetrain went in as a complete unit – fast and easy!

GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion

Continuing on a bike lift – fairing, wiring, sheet metal… it is starting to look like a Harley!

GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion

The finished bike passed inspection by State Patrol of WA and is titled as a 1981. This build was very enjoyable and cost me somewhere around 35% of a new bike – not counting my labor. I did some engine work too. 107cui, heads, cams and a good EFI tune - this bike is a lot of fun to ride. Nothing has fallen off of it over the years and I hope it stays that way.       

GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion GeezerGlide Triple-Tree Conversion

FrankenGlide is going through another upgrade cycle now. The bike has been converted to 49mm forks using our kit along with some prototype suspension parts. It is waiting for final assembly. Check back for updates sometime!

I’m Andreas, one of the owners of GeezerGlide LLC. My first Harley was a 1980 FXWG. I still have it and will not ever sell it. I’ve been around Harleys for decades and hope to stick around for a while longer. Ride safe!

Leave a comment

Please note, comments must be approved before they are published

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods